Services

Continuously expanding and investing

Camco is continuously expanding and investing in new and technically advanced equipment for all service segments. Please send an e-mail to support@camco-ofs.com, if you require services not listed on this site.

Artifical Lift
Camco offers a complete artificial lift solution.

As one of the first companies in the Middle East to install ESPs, Camco’s services cover supply and installation of all downhole and surface equipment required to operate ESPs and continuous monitoring systems.

Covering the entire life cycle of an ESP from design to procurement, installation, maintenance, pull, repair and exchange, Camco also operates state-of-the-art assembly, repair and test centers. These centers are designed to optimize the total cost of ownership and maximize the value to our clients.

To ensure production optimization we have a client center which integrates surface monitoring and control systems (SCADA).

Camco offers different commercial models that vary from standard product sales to lease contracts including performance based contracts, giving our clients the flexibility to choose a tailored solution that covers all their needs. Camco also offers sucker rod pumps (SRP) to cover different artificial lift applications and needs.

Drillstem testing
Camco provides drillstem-testing (DST) services to help customers assess the dynamic properties of their reservoir and to assess potential productivity before a permanent completion string is installed. Camco DST operations enable operators to assess the flow properties of their reservoir, the quantity and quality of hydrocarbons in place, estimate a production lifecycle and decide on the most appropriate completion tools

Camco provides cased hole DST services for standard size well bores using a 5 inch DST string with full multi-cycle operating capabilities.

The Camco DST system enables customers to conduct production and injection operations, gravel packing, fracturing, acidizing and stimulation jobs. The Camco DST can be run in conjunction with TCP and ESP.

Logging
Camco provides production logging, in both real-time and memory modes, cement bond logging, TCP correlation, depth determination, plug and packer setting and free point identification services.

Our cased hole logging service is delivered from heavy-duty 6×6 trucks that can access off road areas. Camco logging trucks are designed to operate in extremes of temperature and are ideally suited to campaigns in desert environments.

We provide an extensive range of logging systems for standard wells operations, including: the Radial Bond Tool, advanced telemetry systems, a range of flowmeters, water hold up and fluid density tools, gamma ray tools, production dual calipers, combined pressure-CCL tools and correlation gamma ray/CCL.

In addition to these systems, Camco also provides basic, open hole logging for development and delineation wells. Our Integra Logging System (ILS) is a powerful data acquisition and field processing logging unit that offers real-time operations in open hole settings. It can be configured as a dual system to provide two complete recording and processing systems. This is ideal for multi-tasking purposes or in situations that require maximum reliability and system redundancy.

Memory gauges
Camco offers a full range of downhole electronic memory gauges. These systems enable customers to conduct broad range of tasks, including: production well testing, extended long-term testing, well stimulation, injection wells, gas lift and ESP wells, detection of gas cooling, production optimisation, fluid level monitoring, permanent monitoring and DST/TCP jobs.

Our gauges are rugged and reliable, shock resistant, easy to operate and have low maintenance requirements.

The smart software systems that our gauges operate provide superior data quality, while large memory capacities and long battery life enable the storage of large data volumes.

Multiphase flow metering
Camco’s multiphase flowmeter (MPFM) systems provide accurate measurements of the flow rates of oil, gas and water in wells without the need for separation or mixing facilities. MPFM technology has been applied in many of the world’s leading oil and gas provinces. The MPFM’s non-intrusive design and dual velocity method for handling phase slip gives the meters a wide operating range that is not limited by the efficiency of the upstream flow conditioner or splitter.

Applications include enhancing oil recovery (through production and exploration well testing, permanent monitoring, choke performance and gas lift and ESP optimisation), production analysis (including prediction of gas breakthrough and water coning) and allocation metering. The system, which is small and suitable for installation in remote or unmanned locations, copes with high production rates, high-pressure high temperature wells and H2S service.

Perforating services
Camco has a strong track record for the safe and successful delivery of wireline-conveyed and tubing-conveyed perforating. We provide a range of shot density and phasing options, including high shot density systems, and can design perforation programmes for deep penetration (up to 64 inches) and fracturing applications.

Through-tubing systems range from: 1-11/16 to 2-7/8-in (maximum 6 spf) and casing guns range from: 3-3/8-in to 7-in (maximum 12 spf). Other sizes and systems can be offered on request.

Camco provides underbalance and overbalance casing perforation using Super Deep Penetration HMX charges. These industry-leading charges are designed to deliver deep penetration in hard rock layers and increase productivity by shooting past formation damage to intersect more of the reservoir’s natural fracture network.

Sampling
Camco provides a wide range of sampling services, including: bottom hole sampling, surface fluid sampling; atmospheric dead oil and water sampling, well head sampling, and cased hole monophasic single phase sampling. Our capabilities also include onsite sample validation and a comprehensive service for sample bottle management, handling and storage.

Reservoir fluid sampling is a vital tool for production engineers, enabling them to characterise fluids under downhole conditions. Camco uses state-of-the art Leutert equipment to provide PVT-quality bottomhole sampling services and surface sampling services. These rugged, stainless steel systems operate on the positive displacement principle and offer pressure compensation, mercury-free sampling and minimal dead volume.

Our sampling systems are suitable for operations in deep, high-pressure high temperature (up to 15,000psi and 350 ℉) wells and sour environments (including hydrogen sulphide and carbon dioxide). They are also suitable for operations involving heavy oil wax and asphaltene wells and can be applied in both onshore and offshore environments.

Slickline services
Camco offers a complete range of slickline services for land and offshore operations including downhole measurements, sampling, fishing, completions, swabbing and other well interventions. We have the capabilities to take on projects that involve rigless operations in high-temperature and high-pressure environments.

Camco systems, including slickline units, pressure control equipment and independent crane trucks for rigless interventions, are designed to deliver heavy-duty service in desert environments. We also provide a range of offshore equipment, including an offshore zone-2 containerized slickline unit and offshore skidded mast.

Our slickline tools are available in multiple sizes to meet the specific needs of customer operations.

Well Testing
Camco offers a comprehensive range of surface and ESP well testing services. Services include the provision of 5k and 10k surface testing packages, multiphase flowmeters, green burners, gauge tanks and surge tanks and all other related accessories. The testing separators and the MPFM are all packaged as trailer mounted mobile units. This setup allows expeditious rig-up and rig-down operations.

We have offered ESP well testing services since 1996. Our services cover supply and installation of all downhole and surface equipment required to operate ESPs and continuous monitoring systems in drilling and workover situations. Downhole monitoring and control are achieved using the Phoenix sensor, an integrated solution for monitoring ESP performance. Attached to the bottom of the ESP string, the sensor transmits signals to surface to provide a real time picture of downhole events.

Our well tests provide valuable information that helps determine the economic productivity of newly drilled wells, to establish whether a well is producing to its maximum potential or to evaluate the results of a workover.